1. Introduction of practical experience in laser welding

1. In the laser welding process, in order to ensure that the equipment is in working condition for a long time, we must do a full inspection before starting the machine. In particular, it is necessary to check its media grinding disc, lens protection glass and some components in the optical path, so that we can better determine that there is no dust pollution or moldy phenomenon, so it will be compared during use Smooth, no accidents will occur, so you can ensure long-term use without interruption

2. We want to ensure that the purity of the cooling water for laser welding is relatively high, it is best to check it before each use, so as to ensure its conductivity, we can distinguish its quality by its color If it is dark brown or black, then we have to replace it in time.

2. When using laser welding, we must consider the following parameters.

1. Power density, which is the main part to ensure normal processing during processing. We must control it within an appropriate time range. At the same time, during processing, we need to process the material, punch, cut and For carving, if we want to process it into a different shape, we must adjust it in different parameter ranges, so as to ensure that there will be no abnormal phenomena. In various laser welding, we can control its power from 100 to 11 Between, the processing will be more safe in this range.

2. Pulse waveform, this is also a very important issue, and when it is used, it is also very important for the welding of the thin sheet.When the high-intensity refraction is on the surface of the material, we must adjust it in time, so as to ensure In the role of pulse, a relatively strong reaction can be emitted, which will bring greater reliability to welding.